Please help me bee! It's 7:20PM , i'm up in the moutains pulled over because of car issues.. I have a 2007 Ford Mustang, and when I shifted into gear, I heard these screws fall out of my car, and my shift went "loose".. Pleas help it's getting cold, .
Please help me bee! It's 7:20PM , i'm up in the moutains pulled over because of car issues.. I have a 2007 Ford Mustang...
Other urls found in this thread:
Go to the ford150 forum faggot.
This is audi5000.
would help but my stang is automatic so idk
have fun with the skinwalkers RIP
Bumping general/interesting/simi-related webms.
sucks to be you. thats what you get for buying a mustang that is built in a mazda plant
Your fucked.
Call 911 dumbass
get comfortable
He has car problems. He's not being raped.
>Mustang
You deserve it
Will your car shift gears or the shifter is loose?
Fuck you my mazda has never failed on me, that's some shitty American production right there.
>Please help me bee!
bee? Wtf is happening to this shithole. It's being filled with retards even more retarded
op - automatic or manual?
Troof! I work there... Flat Rock, Michigan
because your mazda is built in michigan, by former UAW employees
Idk shit about mustangs but my friends neon shifter cable broke one time. If you can reach the transmission you should be able to put your car in drive with your fingers. Pull your ebrakw first (hopefully it works)
mazda mustangs, since 2005
I knew i should have got a ricer.
I know.
manual ..
That isn't even anything to get butt hurt about, you are overcompensating for some reason.
Use that cell phone to call help you jagged off.
...
Nevermind if it's manual. I thought it was auto. Good luck op
The shifter has gone completely lose? Doesn't feel like it engages a gear at all?
Boy that shit was built in Hiroshima. Nuked them slant eyes hard enough to make some good cars.
It needs to be towed. You can't get it moving on your own if it's manual.
Shift linkage prob came lose
Have a car problem? Go to a car forum. This is /b. Fuck you.
If you're lucky it's just your shift linkage that came loose. Crawl under and find the shift linkage you might be able to pop that bolt back in
Shift linkage should be 2 bars going from the shifter to your transmission
I got you fam
You can also take the rubber boot off from the shifter and check the bolt there
I can kind of feel it, but I have to pull up on the shifer to get it to connect,, and even then, It doesnt sound like it is going in all the way.
>Cred Forums
This is a fucking RANDOM image board fagloard, this shit is fine, sorry I interrupted your trap and gay furry porn supply.
Imma try that, it is probably cool by now.
Thats exactly what it is. It's gna be 10mm OP
ILL FOLLOW DAT ASS IN THA MALL
Depress the clutch, start the engine, try for first. Ease out on the clutch and lemme know what happens.
thats the bolt that holds to up-end of the grammeter with the lower end of the tremmy pipe, really important to counteracting side fumbling.
Here's a pic of shift linkage to give you an idea what to look for
Dont confuse him. Its bad enough OP doesnt know a screw from a bolt.
Nice work, mofoking B is still delivering.
It has no shift linkage and those parts don't go to the transmission
I hate being broke down. Spent a lot of time on the side of the road in my days lol
Looks like you have an automatic and that is a bolt belonging to linkage. Jack it up and look for something out of place, its probably stuck between gears
Cred Forums can be anything you ignorant google, that's why it's called RANDOM.
Have any of you ever pulled out a transmission in a Mustang
bumping in a good thread for once.
...
Where you located op?
Nvm 3 hour time difference from me. Hope you get it fixed
Shifter bolts to top of transmission no shift linkage .
Bumping BC useful thread
mustangs are top loading manual transmissions, they do not have linkage rods
Neither of those look like 10mm. Certainly would be the first 12pt 10mm I've seen on a car.
Still stranded,, Im trying to see if I connect the screw from the top, but it looks like there isnt enough room.. .
on my way to Lake Tahoe... If any of you are around, ill share my coordinates.
That's true with manual transmissions..
Better start walking
fuck you colorado faggot...i hope you die in those mountains, you incest bred hillbilly
Do you have a female available for fuck? That's the only condition I'll consider
Jealousfag detected
Didn't know that. Noted.
Every manual trans ive dealt with had shift linkage but they were mid 90s. Thanks user
Lol, what the fuck is this retard talking about, Colorado is a solid 800 miles from where I am .
They were also fwd
Looks like someone is going to camp in his car
Go ask here allfordmustangs.com
i know what is wrong with that punk stang, but ill never tell this dumb fuck
underrated post
Its a fucking automatic
Op said earlier it's a manual you autistic fuck. Learn to read the god damn thread faggot
OP, do you live in murica? If so what state?
Clutch linkage?
Call a tow truck op
The bolt is a shifter handle bolt. Not sure what the gear like nut is for.
Can you put it in any gear?
Look on the bright side OP at least you know this isn't a major transmission malfunction. Those are usually big bucks.
...
UPDATE::: I was able to pop it into the upper gears (1,3,6) after I wiggle the hadle, I got it up to my family cabin. I am not going to freeze to death in my car tonight.
Yeah I know, It seems like it is just some sort of basic connection to the actual handle. I’m going to have to look more into it tomorrow , when it is light out.
YEEEEEEE
look on the driver side of the case....this is what you lost.
send coordinates op, we'll be there soon
you only have upper gears (1.3.6.) you are going to have to take the cover off the top of the trans, realign the shifter forks inside the trans
...
you know what they say, found on road dead. or in reverse driver returns on foot
Did you put the bolt back in?
You need to find that shift linkage and somehow get your fingers in there to at least finger tighten it.
Nice are those pics from your car?
you going to have to take off the top of the transmission (where the shifter goes into the trans)
re-align the shifter forks, push the big 12 point bolt back inside the trans, then tighten the fork with the 10mm bolt.
PICS ARE FROM MY FORD TRUCK ( VERY SIMILAR)
...
...